Store this site | Set for homepage
 
kepala3.gif
China Head Office

Tel: 0086-371-86162511
Fax: 0086-371-67992699
E-mail: limingzkcrusher@gmail.com
MSN: SalesCrusher@hotmail.com

Shanghai Branch

Tel: 0086-21-58386080
E-mail: sales@shcrusher.com

Beijing Branch

Tel: 0086-10-64070219
E-mail: liming.beijing01@gmail.com


CS series cone crusher

The CS series cone crusher appears earliest in the world, and is used widely at present. With the improvement of series of CS series cone crusher, Break-day corporation explores a PYS series of CS series cone crusher, its structure is more perfect and technology parameter is more advanced, so these crushers have excellent performance in the aspects of manufacture, installation, operation and maintenance, etc. And the spring release system generates more opposing force than other cone crushers. So it is widely used in mine industry.
CS series cone crusher technical parameter chart can be developed for use as an application tool to properly utilize the CS series cone crusher’s capabilities.
The CS series cone crusher is one component of the production line. As such, its performance is in part dependent on the proper selection and operation of feeders, conveyors, screens, supporting structure, electric motors, drive component and surge bins.
Where used, attention to the following factors will enhance CS series cone crusher capacity and performance.
1. Proper selection of crushing chamber for material to be crushed.
2. A feed grading containing proper distribution of the particle size.
3. Controlled feed rate.
4. Proper feed distribution 360° around crushing chamber.
5. Discharge conveyor sized to carry maximum crusher capacity.
6. Properly sized scalping and closed circuit screens.
7. Automation controls.
8. Adequate crusher discharge area.
After the material has slid down a short distance, the larger lumps or masses of the material are crushed into smaller masses by the impact created when these lumps are caught between the crushing head wall and the inner wall of the mantle jacket, as the head approaches a portion of the mantle wall.
When the head retracts after having delivered the impact, the material continues to slip down and spread out on the flaring wall of the head along a course bounded by the adjacent head and mantle walls, until another impact is delivered by the head. After each succeeding impact the crushed material becomes smaller and slides along and spreads out into an area of the tapered cavity having a smaller spacing between its walls.
The final size of the crushed product is determined by the spacing between the walls at the lower end of the crushing cavity, when the head is in its position closest to the mantle.
The size of the crushed product can be regulated by raising or lowering the mantle by means of the sprocket nuts, thereby increasing or decreasing the cross section of the crushing cavity.

Symons cone crusher
 
CS series cone crusher Specifications:

NOTE:
1. THE CAPACITY IS ON THE BASIS OF 1.6T/ CUBIC METER;
2. I ---STAND FOR FINAL PRODUCT( WHICH IS SCREEND OUT);
3. II---STAND FOR THROUGH CAPACITY (FINAL PRODUCT AND CIRCULATING LOAD).
Standard:

Model

Dia. mm (feet)

Cavity

Feed Opening

Outlet Setting (mm)

Shaft Speed (r/min)

Power (kw)

Capacity (t/h)

Weight (t)

Dimension (mm)

Closing Side (mm)

Open Side (mm)

CSB75

900 (3')

Fine

83

102

9-22

580

75

45-91

15

2821×1880×2164

Coarse

159

175

13-38

59-163

CSB160

1295 (4 1/4')

Fine

109

137

13-31

485

185

109-181

27

2800×2342×2668

Medium

188

210

16-38

132-253

Coarse

216

241

19-51

172-349

CSB240

1650 (5 1/2')

Fine

188

209

16-38

485

240

181-327

55

3911×2870×3771

Medium

213

241

22-51

258-417

Coarse

241

268

25-64

299-635

CSB315

2134 (7')

Fine

253

278

19-38

435

315

381-726

110

4613×3251×4732

Medium

303

334

25-51

608-998

Coarse

334

369

31-64

789-1270

Short Head:

Model

Dia. mm (feet)

Cavity

Feed Opening

Outlet Setting (mm)

Shaft Speed (r/min)

Power (kw)

Capacity (t/hour)

Weight (t)

Dimension (mm)

Closing Side (mm)

Open Side (mm)

CSD75

914 (3')

Fine

13

41

3-13

580

75

27-90

15

2821×1880×2410

Coarse

33

60

3-16

27-100

CSD160

1295 (4 1/4')

Fine

29

64

3-16

485

160

36-163

27

2800×2342×2668

Medium

54

89

6-16

82-163

Coarse

70

105

10-25

109-227

CSD240

1676 (5 1/2')

Fine

35

70

5-13

485

240

90-209

55

3917×2870×3771

Medium

54

89

6-19

136-281

Coarse

98

133

10-25

190-336

CSD315

2134 (7')

Fine

51

105

5-16

435

315

190-408

110

4130×3251×4454

Medium

95

133

10-19

354-508

Coarse

127

178

13-25

454-599