Store this site | Set for homepage
 
kepala3.gif
China Head Office

Tel: 0086-371-86162511
Fax: 0086-371-67992699
E-mail: limingzkcrusher@gmail.com
MSN: SalesCrusher@hotmail.com

Shanghai Branch

Tel: 0086-21-58386080
E-mail: sales@shcrusher.com

Beijing Branch

Tel: 0086-10-64070219
E-mail: liming.beijing01@gmail.com


Sand Washing Machinery

XSD seriesSand Washing Machinery is suitable for stuff washing task such as manufactured sand or natural sand. It is used in building plant, quarry, concrete plant, dam building, casting-70 sand, glass factory's quartz sand and refilling pressure sand.
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

Operating principle:
The electric motor runs slowly with the impellor after decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, rolls with the impellor, and grinds each other. The impurity covering the sand is washing away. At the same time, add more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lift up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; on the other hand, the water can be fully used. Finally, the sand and stone goes to the out launder from the rotary impellor to finish the washing task.

Characteristics of Sand Washing Machine:
Reasonable structure,
Large capacity,
Low consumption,
Little loss of the sand during the washing process,
Low failure rate.

Sand Washing Machinery
 
Sand Washing Machinery Specifications:

Model

Wheel Size (mm)

Max feed size (mm)

Power (kW)

Weight (t)

Capacity (t/h)

Overall dimension (mm)

XSD2610

Φ2600×1000

10

5.5

2.7

20-50

3255×1982×2690

XSD2816

Φ2800×1600

10

11

5.5

30-60

3540×3000×2880

XSD3016

Φ3000×1600

10

15

5.8

50-100

3845×3000×3080

Notice: Any change of Sand Washing Machine technical data shall not be advised additionally.